SR23
Stinger 1
2 × 3 prototyping platform.
- Spindle
- 1 HP standard
- Supply
- 120 V (1 HP) · 230 V (3 HP)
- Controller
- WinCNC
- ODO head
- Not offered
Specifications
Machine configurations
Spindle, supply voltage, frame sizes and electrical requirements for every TruAxis line. Choose a line, frame, controller, spindle and voltage — we build the machine to match.
Frame sizes shown are the catalog. Other sizes are quoted on request and are made to order. WinCNC is the shipping controller; LinuxCNC and Yaskawa editions are in development and not currently available.
Options by line
SR44 · SR48
Stinger 2 / 3
4 × 4 shop platform; Stinger 3 is the 4 × 8 table.
- Spindle
- 1.7 kW standard · 3 kW optional
- Supply
- 230 V, single-phase
- Frame sizes
- Stinger 2 — 4 × 4 · Stinger 3 — 4 × 8
- ODO head
- Available
PT508
Panther
5 × 8 production platform.
- Spindle
- 5 HP standard · 7.5 HP optional
- Supply
- 230 V 1φ (5 HP) · 230 / 480 V 3φ (10 HP)
- Frame sizes
- 4 × 4 · 5 × 8 (line standard) · 5 × 10
CR510
Cobra Elite
5 × 10 industrial platform.
- Spindle
- 10 HP standard · 13.5 HP optional
- Supply
- 230 V · 480 V 3-phase
- Frame sizes
- 5 × 10 (line standard) · 5 × 12 · 7 × 13
Electrical requirements
| Machine | Supply | Full-load amps | Recommended OCPD | Copper, 75 °C |
|---|---|---|---|---|
| Stinger 2 / 3 — 5 HP drive | 230 V 1φ | 43.7 A | 45 A | #8 |
| Panther — 5 HP drive | 230 V 1φ | 43.7 A | 45 A | #8 |
| Panther / Cobra — 10 HP drive | 230 V 3φ | 40.0 A | 40 A | #8 |
| Panther / Cobra — 10 HP drive | 480 V 3φ | 19.9 A | 20 A | #12 * |
| Cobra — 15 HP drive | 230 V 3φ | 57.5 A | 60 A | #6 |
| Cobra — 15 HP drive | 480 V 3φ | 28.7 A | 30 A | #10 |
- HP in this table is the drive (VFD) rating, sized above the spindle — not the spindle horsepower shown above. 480 V is the industrial-shop option, available only on the 10 HP and 15 HP drives.
- Sized to NEC 430.24 — 125% of the largest motor plus 100% of the remaining loads; OCPD is the next standard size per 240.6. Stinger 2 / 3 at 45 A fits a 50 A garage service.
- * #12 copper is code-limited to 20 A; use #10 if you prefer margin.
- Final branch protection, device type and panel SCCR are confirmed for your drive and local code. Stinger 1 electrical figures are not yet published.
Configure your machine
Tell us what you make and we will quote the line, frame, spindle and voltage that fit the work.